J-Web

Note: First, do basic chassis cluster and management interfaces setup.

1. Fabric Interface

   See CLI.

2. Redundancy Groups

   Configuration > Quick Configuration > Chassis Cluster
   Enter the following, then click Apply:
   Redundant ether-Interface Count: 1
   Heartbeat Interval: 1000
   Heartbeat Threshold: 3
   Nodes: 0
   Group Number: 1
   Priorities: 100

   Enter the following, then click Apply:
   Nodes: 1
   Group Number: 1
   Priorities: 1
   Interface Monitor—Interface: fe-1/0/0
   Interface Monitor—Weight: 255
   Interface Monitor—Interface: fe-5/0/0
   Interface Monitor—Weight: 255
   

3. Redundant Ethernet Interfaces

   Configuration > Quick Configuration > Interfaces

   Select fe-1/0/0.
   Enter the following:
   Redundant Parent: reth0
   Click Apply.

   Select fe-5/0/0.
   Enter the following:
   Redundant Parent: reth0
   Click Apply.

   For other configuration settings of Step 5, see CLI

4. Static Routes (one to each ISP, with preferred route through ge-0/0/0)

   Configuration > Quick Configuration > Routing and Protocols > Static Routing: click Add.
   Enter the following, then click Apply:
   Static Route Address: 0.0.0.0/0
   Next-Hop Addresses: 1.4.0.1, 1.2.1.1
   

5. Security Zone

   See CLI.

6. Access

   See CLI.