Configuring Static NAT

Static NAT is a direct one-to-one mapping of one IP address to another without port address translation.

Note: At this time, SRX-series services gateways do not support static NAT.

In this example, you perform the following tasks:

1. Define a static NAT on an interface (ge-0/0.0.0) that maps a host IP address (10.1.1.1) to an address (1.1.1.1).
2. Define a static NAT on an interface (ge-0/0/0.0) that maps a host IP subnet (10.1.3.0/24) to a subnet (1.1.3.0/24).
3. Reference a static NAT (1.1.3.0/24) in a policy (static-nat-policy).