[
Contents]
[
Prev]
[
Next]
[
Report an Error]
Outstanding Issues
ALG
- On J6350 Services Routers handling
more than 1000 simultaneous MGCP calls, the success rate for all MGCP
ALG calls is approximately 95 percent. [PR/254297]
Authentication
- During user authentication, the firewall
authentication table in the output of the security firewall-authentication
users command displays multiple failures even though the network
table in the output of show network-access requests statistics shows successful authentications. [PR/250780]
Flow
- Firewall filter counters for ingress (inbound)
and egress (outbound) forwarding table filters (FTFs) do not work
for IPv4. [PR/97230]
- OSPF over GRE over IPsec does not work.
[PR/105279]
- Even when forwarding options are set to
drop packets for the ISO protocol family, the router forms End System-to-Intermediate
System (ES-IS) adjacencies and transmits packets because ES-IS packets
are Layer 2 terminating packets. [PR/252957]
Infrastructure
- If the router does not have an ARP entry
for an IP address, it drops the first packet from itself to that IP
address. [PR/233867]
- If you enable security traceoptions, the
log file might not be created in the default location at /var/log/security-trace. As a workaround, manually set the log file to the directory /var/log/security-trace. [PR/254563]
Interfaces and Chassis
- The link status of the onboard Gigabit Ethernet interfaces
(ge-0/0/0 through ge-0/0/3) or the 1-port Gigabit
Ethernet ePIM interface on J4350 and J6350 Services Routers fails when
you configure these interfaces in loopback mode. [PR/72381]
Routing
- Asymmetric routing, such as tracing
a route to a destination behind J-series routers running JUNOS software
with enhanced services with Virtual Router Redundancy Protocol (VRRP),
does not work. [PR/237589]
User Interfaces and Configuration
- A user cannot log in to
the J-Web client through RADIUS or TACACS+ authentication if the user
profile already has authorization parameters specified on the server
side. As a workaround, ensure that the user profile parameters are
not specified or are set with empty values on the server. [PR/94445]
WXC Integrated Services Module
- When two J-series routers with WXC Integrated Services Modules
(ISM 200s) installed are configured as peers, traceroute fails if redirect-wx is configured on both peers. [PR/227958]
[
Contents]
[
Prev]
[
Next]
[
Report an Error]