Table 20 provides software release information, port numbers, and sample interface names for the field-replaceable PIMs and modules supported on J2320 and J2350 Services Routers. For interface naming conventions, see the JUNOS Enhanced Services Interfaces and Routing Configuration Guide. The supported PIMs can be installed in any slot available on the J2320 and J2350 routers. The WXC Integrated Services Module supported on the J2350 model occupies two slots. You can install only one of these modules in a router chassis.
 |
Caution: Do not install a combination of modules in a single chassis that exceeds the maximum power and heat capacity of the chassis. If J-series power management is enabled, PIMs and modules (PIMs or PIMs plus a WXC Integrated Services Module) that exceed the maximum power and heat capacity remain offline when the chassis is powered on. |
To verify that the combination of modules to be installed in a chassis does not exceed the power and heat capacities for the router, see Planning for Power Management.
Table 20: J2320 and J2350 Field-Replaceable PIM and Module Summary
