[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Installing Software Upgrades by Uploading Files

You can use the J-Web interface to install software packages uploaded from your computer to the Services Router. Before installing the software upgrade, you need to verify that there is enough available space on the compact flash.

Note: This procedure applies only to upgrading one release of the JUNOS Enhanced Services software to another. To upgrade from the JUNOS software to the JUNOS Enhanced Services software, see the JUNOS Enhanced Services Migration Guide.

Figure 13 shows the Upload Package page for the router.

Figure 13: Upload Package Page

Image s020260.gif

To install software upgrades by uploading files:

  1. Before installing the software upgrade, verify the available space on the compact flash. For information about verifying available compact flash space, see the JUNOS Enhanced Services Release Notes.
  2. Download the software package as described in Downloading Software Upgrades from Juniper Networks.
  3. In the J-Web interface, select Manage>Software>Upload Package.
  4. On the Upload Package page, enter information into the fields described in Table 120.
  5. Click Upload Package. The software is activated after the router has rebooted.

Table 120: Upload Package Summary

Field

Function

Your Action

File to Upload (required)

Specifies the location of the software package on the local system.

Type the location of the software package, or click Browse to navigate to the location.

Reboot If Required

If this box is checked the router is automatically rebooted when the upgrade is complete.

Select the check box if you want the router to reboot automatically when the upgrade is complete.
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]