Resolved Issues

The following issues have been resolved since JUNOS Release 8.5R2:

• When an ISDN interface is taken offline, the LEDs on the ISDN PIM might not turn off. [PR/59536: This issue has been resolved.]
• On J-series Services Routers, if you have configured an IPSec-over-GRE tunnel, there might be fragmentation issues. [PR/74377: This issue has been resolved.]
• On J-series Services Routers running JUNOS Release 8.3 or later, a Channelized T1/E1/ISDN PRI PIM running firmware version 2.3 or earlier might not be initialized or might have clocking problems. [PR/102638: This issue has been resolved.]
• On a J-series router with a Dual-Port Channelized T1/E1/ISDN PRI PIM installed, the channelized interfaces are configured to share ISDN PRI B-channel bc-pim/0/port time slots with DS0 ds-pim/0/port time slots and the B-channels used for dialout to back up the DS0 channels if they are unavailable. When the primary ds-pim/0/port:channel are available again, dialout on the backup B-channel might not be terminated. [PR/266900: This issue has been resolved]
• Routing Engine software downgrade using jinstall does not repartition the hard disk, which results in an unsuccessful snapshot. [PR/279358: This issue has been resolved]