A Commands > adapter enable

adapter enable

Description: 

Enables the IOA installed in the specified IOA bay. There is no no version.

NOTE: Issuing this command reboots the line module associated with the IOA, but it does not enable it. To enable the line module and its associated IOAs, issue the slot enable command.

Syntax: 

adapter enable adapterSpecifier

• adapterSpecifier—Particular IOA in the format slot/adapter:

• slot—Number of the chassis slot in the range 0-5 or 11-16
• adapter—Identifier for the IOA within the chassis slot, either 0 or 1, where:

• 0 indicates that the IOA is installed in the upper IOA bay.
• 1 indicates that the IOA is installed in the lower IOA bay.

Mode(s): 

Global Configuration