S Commands > shared-shaping-rate

shared-shaping-rate

Description: 

Sets the shared shaping rate and burst size for the logical interface. This command must appear in the scheduler profile for either the best-effort queue or the best-effort scheduler node. The no version deletes the shared shaping rate.

Syntax: 

shared-shaping-rate sharedShapingRate [ burst burstSize ] [ simple | auto | compound ] [ explicit-constituents ]

no shared-shaping-rate

• sharedShapingRate—Bits per second in the range 64000-100000000 (64 Kbps-1 Gbps)
• burstSize—Number in the range 0-522240 (0-510 KB); 0 enables the router to select an applicable default value
• simple—Specifies the simple form of shared shaping, which does not manage voice and video traffic, but shapes data queue rates to the value of the shared rate minus the combined voice and video traffic rate
• auto—Specifies that the router automatically selects the type of shared shaping depending on the module; compound is selected only for line modules that support it, and simple is selected for all other line modules; this is the default mode
• compound—Specifies the compound form of shared shaping, which actively shapes voice and video traffic so that the shared rate cannot be exceeded, and shapes data queue rates to the value of the shared rate minus the combined voice and video traffic rate; requires special hardware
• explicit-constituents—Overrides automatic selection of compound shared-shaping constituents and enables you to explicitly specify constituents and bandwidth allocation; generates an error message and has no effect if applied to modules that do not support compound shared shaping

Mode(s): 

Scheduler Profile Configuration