Supported Modules and Features
This section describes ATM feature support on E-series modules.
For more information about the physical layer characteristics of the modules described in this section, including the numbering schemes, see JUNOSe Physical Layer Configuration Guide.
For information about the protocols and applications that ATM modules support on ERX-7xx models, ERX-14xx models, and the ERX-310 router, see E-series Module Guide, Appendix A, Module Protocol Support.
Module Capabilities
The level of support for certain ATM capabilities varies depending on the module. Table 8 lists the specific differences in the capabilities of the modules.
Keep the following points in mind when you review Table 8:
- The number of VP tunnels varies with the number of ports in the associated line module. For information about the maximum number of ATM VP tunnels supported per port for all line modules, see JUNOSe Release Notes, Appendix A, System Maximums.
- Traffic rates (for tunnels or circuits) on T3/E3 ATM modules must be a minimum of 64 Kbps.
NOTE: Support for the OC3 (dual port) line module has been deprecated.
Virtual Channel Support
The router supports up to 16,000 virtual channels on each port (for a total of 64,000 VCs), depending on the type of module and how much memory it has, as listed in Table 9.