Displaying Boot Information

You can display information about the system's booting configuration, installed hardware versions, and installed software versions.

show boot

• Use to show the current boot settings.
• Example

host1#show boot

System Release:         release.rel

System Configuration:   running-configuration

Note: This system is not configured with backup settings.

show hardware

• Use to display detailed information about the system hardware.
• Field descriptions

• slot—Physical slot that contains the module
• type—Type of module
• serial number—Serial number of the module
• assembly number—Part number of the module
• assembly rev—Hardware revision of the module
• ram (MB)—Memory capacity of the host processor
• number of MAC addresses—Total number of Ethernet addresses on an I/O module
• base MAC address—Lowest Ethernet address on an I/O module

• Example
  

host1>show hardware

                        serial      assembly    assembly   ram

slot       type         number       number       rev.     (MB)

----   ------------   ----------   ----------   --------   ----

0      SRP-10G        7100170186   3500005201     A07      512

1          ---           ---          ---         ---      ---

2          ---           ---          ---         ---      ---

3      OC3/OC12-ATM   4302380131   3500103905     A00      128

4      DPFE           7100410176   3500007001     A02       64

5      CT3            7199310018   3400004700     000       64

6          ???           ???          ???         ???       64

                                                            number

                                                              of

                        serial      assembly    assembly      MAC

slot       type         number       number       rev.     addresses

----   ------------   ----------   ----------   --------   ---------

0      SRP-10G I/O    7199170147   3400003301     000         16

1          ---           ---          ---         ---         ---

2          ---           ---          ---         ---         ---

3      OC3-4MM I/O    4302360285   3500006502     A03          4

4      DPFE I/O       7100390323   3500006701     A02          2

5      CT3/T3-3 I/O   7199150162   3400003200     000

6      CT1 I/O        7199460217   3400006401     A02

            base

slot    MAC address

----   --------------

0      0090.1a00.09a0

1           ---

2           ---

3      0090.1a40.4c7c

4      0090.1a10.0b78

5

6

show last-reset

• Displays the reason for the system's last user-directed reload or error-caused reset.
• Example
  

host1#show last-reset

last reset: power cycle

show reload

• Displays the system's reload status.
• Example
  

host1#show reload

reload scheduled for TUE OCT 2 2001 10:10:00 UTC

show version

• Use to display the configuration of the system hardware and the software version.
• Example
  

host1#show version

Juniper Networks Edge Routing Switch ERX-700

Copyright (c) 1999-2002 Juniper Networks, Inc.  All rights reserved.

System Release: erx_4-1-0b0-13.rel

        Version: 4.1.0 beta-0.13 [BuildId 25]   (July 9, 2002  13:17)

System running for: 18 days, 6 hours, 13 minutes, 21 seconds

        (since WED JUL 10 2002 20:35:31 UTC)

slot state   type   admin  spare  running release    slot uptime

---- ------ ------ ------- ----- ------------------ --------------

0    online SRP-5G enabled  ---  erx_4-1-0b0-13.rel 18d06h:12m:13s

1     ---    ---     ---    ---         ---              ---

2     ---    ---     ---    ---         ---              ---

3    online OC3sP2 enabled  ---  erx_4-1-0b0-13.rel 18d06h:11m:44s

4    online DPFE   enabled  ---  erx_4-1-0b0-13.rel 18d06h:11m:45s

5    online CT3    enabled  ---  erx_4-1-0b0-13.rel 18d06h:11m:44s

6    online CT1    enabled  ---  erx_4-1-0b0-13.rel 18d06h:11m:44s

Output Filtering

The output filtering feature of the show command is not available in Boot mode.