[Contents] [Prev] [Next] [Index] [Report an Error]

Related Juniper Networks Documentation

The E-series Installation Quick Start poster is shipped in the box with all new routers. This poster provides the basic procedures to help you get the router up and running quickly.

Table 3 lists and describes the E-series document set. A complete list of abbreviations used in this document set, along with their spelled-out terms, is provided in the JUNOSe System Basics Configuration Guide, Appendix A, .

Table 3: Juniper Networks E-series Technical Publications

Document
Description

E-series Hardware Guide

Provides the necessary procedures for getting the router operational, including information about installing, cabling, powering up, configuring the router for management access, and general troubleshooting. Describes SRP modules, line modules, and I/O modules available for the E-series routers.

E-series Module Guide

Provides detailed specifications for line modules and I/O modules, and information about the compatibility of these modules with JUNOSe software releases. Lists the layer 2 protocols, layer 3 protocols, and applications that line modules and their corresponding I/O modules support. Provides module LED information.

JUNOSe System Basics Configuration Guide

Describes planning and configuring your network, managing the router, configuring passwords and security, configuring the router clock, and configuring virtual routers. Includes a list of references that provide information about the protocols and features supported by the router.

JUNOSe Physical Layer Configuration Guide

Describes configuring physical layer interfaces.

JUNOSe Link Layer Configuration Guide

Describes configuring link-layer interfaces.

JUNOSe Routing Protocols Configuration Guide, Vol. 1

Provides information about configuring routing policy and configuring IP, IP routing, and IP security.

JUNOSe Routing Protocols Configuration Guide, Vol. 2

Describes BGP routing, MPLS, BGP-MPLS VPNs, and encapsulation of layer 2 services.

JUNOSe Policy and QoS Configuration Guide

Provides information about configuring policy management and quality of service (QoS).

JUNOSe Broadband Access Configuration Guide

Provides information about configuring remote access.

JUNOSe Command Reference Guide A to M; JUNOSe Command Reference Guide N to Z

Together constitute the JUNOSe Command Reference Guide. Contain important information about commands implemented in the system software. Use to look up command descriptions, command syntax, a command's related mode, or a description of a command's parameters. Use with the JUNOSe configuration guides.

Release Notes

JUNOSe Release Notes

In the Release Notes, you will find the latest information about features, changes, known problems, resolved problems, and system maximum values. If the information in the Release Notes differs from the information found in the documentation set, follow the Release Notes.
Release notes are included on the corresponding software CD and are available on the Web.

Document	Description
E-series Hardware Guide	Provides the necessary procedures for getting the router operational, including information about installing, cabling, powering up, configuring the router for management access, and general troubleshooting. Describes SRP modules, line modules, and I/O modules available for the E-series routers.
E-series Module Guide	Provides detailed specifications for line modules and I/O modules, and information about the compatibility of these modules with JUNOSe software releases. Lists the layer 2 protocols, layer 3 protocols, and applications that line modules and their corresponding I/O modules support. Provides module LED information.
JUNOSe System Basics Configuration Guide	Describes planning and configuring your network, managing the router, configuring passwords and security, configuring the router clock, and configuring virtual routers. Includes a list of references that provide information about the protocols and features supported by the router.
JUNOSe Physical Layer Configuration Guide	Describes configuring physical layer interfaces.
JUNOSe Link Layer Configuration Guide	Describes configuring link-layer interfaces.
JUNOSe Routing Protocols Configuration Guide, Vol. 1	Provides information about configuring routing policy and configuring IP, IP routing, and IP security.
JUNOSe Routing Protocols Configuration Guide, Vol. 2	Describes BGP routing, MPLS, BGP-MPLS VPNs, and encapsulation of layer 2 services.
JUNOSe Policy and QoS Configuration Guide	Provides information about configuring policy management and quality of service (QoS).
JUNOSe Broadband Access Configuration Guide	Provides information about configuring remote access.
JUNOSe Command Reference Guide A to M; JUNOSe Command Reference Guide N to Z	Together constitute the JUNOSe Command Reference Guide. Contain important information about commands implemented in the system software. Use to look up command descriptions, command syntax, a command's related mode, or a description of a command's parameters. Use with the JUNOSe configuration guides.
Release Notes
JUNOSe Release Notes	In the Release Notes, you will find the latest information about features, changes, known problems, resolved problems, and system maximum values. If the information in the Release Notes differs from the information found in the documentation set, follow the Release Notes. Release notes are included on the corresponding software CD and are available on the Web.

[Contents] [Prev] [Next] [Index] [Report an Error]