IMS AAA Server Release 1.1 Administration Guide > System Setup > Starting the IMS AAA Server Administrator

Starting the IMS AAA Server Administrator

To start the IMS AAA Server Administrator, go to the directory where the Administrator software is installed and enter the following command:

#./a3sadmin.sh &

You should get the following response:

#creating personal settings for user root

launching a3s admin using personal settings in /opt/AAA/a3sadmin/com/funk/srv/a3s/data/per-user/root

The IMS AAA Server Administrator Login dialog (Figure 4) opens:

Figure 4: Login Dialog

Refer to Using the IMS AAA Server Administrator.

First Configuration Steps

The first steps you should perform when configuring the IMS AAA Server are as follows:

• Configure the server identity. The identity of Juniper IMS AAA Server is pre-configured with the Origin-Host=your-host.your-realm.net and the Origin-Realm=your-realm.net. You must reconfigure these settings for your network environment. See Configuring the Server Identification.
• Verify the default log streams are sufficient for your environment. See Event Logging.
• Enable all necessary SNMP alerts for your environment. See SNMP Alerts.