Unpacking the Services Gateway

After you have prepared your installation site as described in Preparing the Site for Services Gateway Installation, you are ready to unpack and install the services gateway. It is important to proceed through the installation process in the following order:

1. Review the safety guidelines explained in Safety and Regulatory Compliance Information.
2. Follow the instructions in this chapter to unpack the services gateway and verify the parts received.
3. Install the mounting hardware as described in Installing the Mounting Hardware.
4. Install the services gateway as described in Installing the Services Gateway or Installing the Services Gateway Without a Mechanical Lift.
5. Perform the initial system startup as described in Connecting the Services Gateway.

This chapter describes how to prepare to install the services gateway. It discusses the following topics:

• Tools and Parts Required
• Unpacking the Services Gateway
• Verifying Parts Received