Before you install the SRC software, collect
information about the system that will run the SAE as described in
the following sections; then contact Juniper Networks Customer Services
and Support and provide this system information to obtain a license.
Pilot License
To obtain a pilot license, you must provide the
following information:
Username to be listed in the license key
Host ID of the SAE host (or the host IDs of all hosts
if you have more than one)
Number of concurrent users that you want to be able to
connect to the SAE
You can determine the host ID by issuing the following
command on a C Series Controller:
user@host> show system information
Look for the value for Hostid in the output;
for example:
Hostid e30a2e07
Server License
To obtain a server license, you must provide the
following information:
Username to be listed in the license key
Maximum number of concurrently active SAE services that
you require
Time interval for which you need the server license
IP address or hostname of the license server. The SAE
requires access to this IP address or hostname.
