The switching plane in the routing matrix consist of the TXP-F2S SIBs and TXP-F13 SIBs in the TX Matrix Plus router and the TXP-T1600 SIBs in the T1600 router. During normal operation:
The following indicate a problem with the switching planes:
To troubleshoot the switching planes:
user@host> show chassis fabric plane extensivesfc0-re0:
--------------------------------------------------------------------------
Fabric Management PLANE State:
PLANE 0: Spare
ABS-SIB-F13 0 : Spare
ABS-SIB-F13 1 : Spare
ABS-SIB-F2 0/0 : Spare
ABS-SIB-F2 0/2 : Spare
ABS-SIB-F2 0/4 : Spare
ABS-SIB-F2 0/6 : Spare
ABS-SIB-F13 0 Even:
LCC 0, ST-SIB-L 0 : Links ok
SG 0
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 1
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 2
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 3
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
ABS-SIB-F13 0 Odd:
LCC 1, ST-SIB-L 0 : Links ok
SG 0
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 1
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 2
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 3
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
ABS-SIB-F2 0/0: Links ok
ABS-SIB-F2 0/2: Links ok
ABS-SIB-F2 0/4: Links ok
ABS-SIB-F2 0/6: Links ok
ABS-SIB-F13 1 Even:
LCC 2, ST-SIB-L 0 : Links ok
SG 0
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 1
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 2
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 3
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
ABS-SIB-F13 1 Odd:
LCC 3, ST-SIB-L 0 : Links ok
SG 0
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 1
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 2
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 3
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
ABS-SIB-F2 0/0: Links ok
ABS-SIB-F2 0/2: Links ok
ABS-SIB-F2 0/4: Links ok
ABS-SIB-F2 0/6: Links ok
PLANE 1: Online
ABS-SIB-F13 3 : Online
ABS-SIB-F13 4 : Online
ABS-SIB-F2 1/0 : Online
ABS-SIB-F2 1/2 : Online
ABS-SIB-F2 1/4 : Online
ABS-SIB-F2 1/6 : Online
ABS-SIB-F13 3 Even:
LCC 0, ST-SIB-L 1 : Links ok
SG 0
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 1
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 2
Port 0 : Links ok
Port 1 : Links ok
Port 2 : Links ok
Port 3 : Links ok
SG 3
Port 0 : Links ok
...user@host> show log messagesFor more information about system log messages, see the Junos OS System Log Messages Reference
.
Your customer support representative can assist you with using the information in the system log, along with the supplied fiber-optic array loopback connector and adapter, to determine if you have a faulty TXP-F13 SIB, TXP-T1600 SIB, or fiber-optic array cable.
![]() | Caution: Do not connect and disconnect a fiber-optic array cable connector, a loopback connector, or a loopback adapter more frequently than required to perform the procedures in this hardware guide. These fiber-optic components are rated for a limited number of insertions (approximately 100). |