Troubleshooting SRX5800 Services Gateway Port Modules

Problem

The port modules are not functioning normally.

Solution

• Check the status of each port on a port module by looking at the LED located on the port module faceplate.
• Check the status of a port module by issuing the show chassis fpc pic-status CLI command. The port module slots in the Flex IOC are numbered from 0 through 1:
  user@host> show chassis fpc pic-status

  Slot 0   Online       SRX5k SPC
    PIC 0  Online       SPU Cp-Flow
    PIC 1  Online       SPU Flow
  Slot 3   Online       SRX5k DPC 4X 10GE
    PIC 0  Online       1x 10GE(LAN/WAN) RichQ
    PIC 1  Online       1x 10GE(LAN/WAN) RichQ
    PIC 2  Online       1x 10GE(LAN/WAN) RichQ
    PIC 3  Online       1x 10GE(LAN/WAN) RichQ
  Slot 5   Online       SRX5k FIOC
    PIC 0  Online       16x 1GE TX
    PIC 1  Online       4x 10GE XFP

  For further description of the output from the command, see the Junos OS System Basics and Services Command Reference.