Routine TX Matrix Maintenance Procedures

• For optimum TX Matrix router performance, perform the following preventive maintenance procedures regularly:
• Inspect the installation site for moisture, loose wires or cables, and excessive dust. Make sure that airflow is unobstructed around the TX Matrix router and into the air intake vents.
• Check the status-reporting devices on the craft interface: system alarms, LEDs, and LED display.
• Inspect the air filters at the bottom front and left rear of the TX Matrix router, replacing them every 6 months. Do not run the TX Matrix router for more than a few minutes without the air filters in place.

  Note: The model number for the TX Matrix air filter replacement is FLTR-KIT-T640-S.