Technical Documentation
Related Documentation
Verifying Parts Received with the SRX3600 Services Gateway
A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order. Note that feature and service cards are shipped in separate boxes from the chassis.
If any part is missing, contact a customer service representative.
A fully configured services gateway contains the chassis with installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your services gateway can vary depending on the configuration you ordered.
Table 1: Parts List for a Fully Configured SRX3600 Services Gateway
Component | Quantity |
|---|---|
Chassis, including midplane, and rack-mounting brackets | 1 |
IOCs | Up to 6 |
SPCs | At least one, and up to 7 |
NPCs | At least one, and up to 3 |
Routing Engine | 1 |
SCM | 0 or 1 |
SFB | 1 |
Power supplies | At least 2, and up to 4 |
Fan tray | 1 |
Air filter | 1 |
SRX3600 Services Gateway Getting Started Guide | 1 |
Blank panels for slots without components installed | One blank panel for each slot not occupied by a component |
Table 2: Accessory Box Parts List
Part | Quantity |
|---|---|
Rack mount kit | 1 |
RJ-45-to-DB-9 cable to connect the services gateway through the serial port | 1 |
Juniper Networks Product Warranty | 1 |
End User License Agreement | 1 |
SRX3600 Services Gateway Getting Started Guide | 1 |
Documentation Information Card | 1 |
Product Registration | 1 |
Juniper Compliance Form Letter; RoHS | 1 |
Declaration of Conformity | 1 |
Document sleeve | 1 |
ESD wrist strap with cable | 1 |
