Connecting the SRX3600 Services Gateway to a Management Console or an Auxiliary Device

To use a system console to configure and manage the Routing Engine, connect it to the RE0 CONSOLE port on the Switch Fabric Board (SFB) using the RJ-45 cable.

To connect a management console or an auxiliary device:

1. Turn off the power to the console.
2. Plug the RJ-45 end of the cable (Figure 2 shows the connector) into the RE CONSOLE 0 port on the SFB.
3. Plug the female DB-9 end into the device's serial port.

   Figure 1: Connecting to the Console Port

   

Figure 2: Console and Auxiliary Cable Connector