Powering Off the TX Matrix Plus Router

1. On an external management device connected to the Routing Engine, issue the request system halt both-routing-engines operational mode command. The command shuts down the Routing Engines cleanly, so their state information is preserved. (If the TX Matrix Plus router contains only one Routing Engine, issue the request system halt command.) For more information about the command, see the Junos OS System Basics and Services Command Reference .
   user@host> request system halt both-routing-engines

   Wait until a message appears on the console confirming that the operating system has halted.

   Halt the system ? [yes,no] (no) yes
   
   *** FINAL System shutdown message from user@host ***
   
   System going down IMMEDIATELY
   
   Terminated
   
   ...
   
   syncing disks... 11 8 done
   
   The operating system has halted.
   
   Please press any key to reboot.
   

2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
3. Switch the circuit breakers on each power supply faceplate to the off position (O).