Connecting an AC Power Cord to the SRX650 Services Gateway

To connect the AC power cord:

1. Locate a replacement power cord with the type of plug appropriate for your geographical location.
2. Connect the power cord to the power supply.
3. Insert the power cord plug into an external AC power source receptacle.
4. Route the power cord along the cable restraint toward the left or right corner of the chassis. If they are needed to hold the power cord in place, thread plastic cable ties, which you must provide, through the openings on the cable restraint.
5. Verify that the power cord does not block the air exhaust and access to services gateway components, or drape where people could trip on it. If the power supply is correctly installed and functioning normally, the POWER LED lights steadily.