Technical Documentation

Documentation Search

You can mount an SRX220 Services Gateway on a wall. The four rubber feet attached to the chassis provide stability.

Table 1 provides the list of tasks you need to perform before installing the device on a wall.

Table 1: SRX220 Services Gateway Preinstallation Checklist for Wall-Mount Installation

Task	Additional Information
Verify that the site meets the requirements.	Site Preparation Checklist for the SRX220 Services Gateway
Remove the services gateway chassis from the shipping box.	Unpacking the SRX220 Services Gateway
Verify that you have the following parts available in your wall-mounting kit to mount the SRX220 Services Gateway on a wall: Wall-mounting brackets Screws

Task

Additional Information

Verify that the site meets the requirements.

Remove the services gateway chassis from the shipping box.

Verify that you have the following parts available in your wall-mounting kit to mount the SRX220 Services Gateway on a wall:

Note: The wall-mounting kit is not shipped with the device and must be ordered separately.