Technical Documentation
Upgrading the FPC Firmware in a T640 Router Before Integrating the Router into a Routing Matrix
Before integrating the T640 router with the TX Matrix router, you might have to upgrade the firmware on one or more FPCs in the T640 router. To upgrade the firmware, you must contact your customer support representative.
To determine if you need to upgrade the FPC firmware, display the version of the firmware on all FPCs by issuing the show system firmware command:
user@host> show system firmwarePart Type Tag Current Available Status
version version
FPC 0 ROM Monitor 0 0 6.4.18 OK
PIC 0 ATM 1/0 FLASH 0 ?? OK
PIC 0 ATM 1/0 FLASH 1 ?? OK
PIC 1 DCHIP 1/1 0 5 OK
PIC 2 DCHIP 1/2 0 5 OK
PIC 3 QGE 1/3 1 4 OK
...
If the Current version field is not 6.4.18 or later for any FPC, you must upgrade the firmware for that FPC.
Published: 2011-12-19
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
