Technical Documentation

Verifying TX Matrix Plus Router Parts Received

A packing list is included in each shipment. The packing list specifies the part numbers and descriptions of each part in your order.

To verify that you have received all parts:

Verify that the items on the packing list are included in the parts in the main shipment (see Table 1).
Verify that all parts for the four-post rack and open-frame rack (see Table 2 or Table 3) have been received.
Verify that all parts for the cable managment system (see Table 4) have been received.
Verify that all parts in the accessory box (see Table 5) have been received.
Verify that all parts in the tool kit (see Table 6) have been received.
If any part is missing, contact a customer service representative.

Table 1: TX Matrix Plus Router Parts List

Component	Quantity
Chassis, including midplane, craft interface, and center-mounting brackets	1
TXP-F13 SIBs	up to 10
TXP-F2S SIBs	up to 20
Routing Engines	1 or 2
TXP-CBs	1 or 2
Power supplies	2
TXP-CIP	2
Front fan trays	2
Rear fan trays	4
Quick Start installation guide	1
Blank panels for slots without components installed	One blank panel for each slot not occupied by a component

Table 2: TX Matrix Plus Four-Post Rack Mounting Hardware Parts List

Component	Quantity
Four-post rack mounting shelf	1
Four-post rack rear support bracket	1

Table 3: TX Matrix Plus Open-Frame Rack Mounting Hardware Parts List

Component	Quantity
Open-frame two-post rack bottom mounting shelf	1 Note: The two-post rack mounting shelf is shipped in three parts that must be assembled.
Open-frame two-post rack mounting shelf flanges	2

Component

Quantity

Open-frame two-post rack bottom mounting shelf

Note: The two-post rack mounting shelf is shipped in three parts that must be assembled.

Open-frame two-post rack mounting shelf flanges

Table 4: TX Matrix Plus Cable Management System Parts List

Part	Quantity
Comb assembly support (right and left)	2
Comb assembly	1
Cable management system support shelves (upper, middle, and lower)	3
Cable management system arms (two left and two right)	4
Philips screws, number 2	28
Front cable manager	1
Tie wraps for the securing the fiber-optic array cables	6

Table 5: TX Matrix Plus Accessory Box Parts List

Part	Quantity
Juniper product ROHS and warranty documents	1
Software license agreement	1
Affidavit for T1 connection	1
Connectors for alarm relay cables Terminal Block Plug, 3 Pole, 5.08 mm spacing, 12A	4
DC power and grounding cable lugs 4-AWG	30 (28 for power—14 for each power supply, 1 for grounding, and 1 spare)
ESD wrist strap with cable	1
Read-me-first document	1
Screws to fasten grounding cable to chassis—Phillips, 1/4-20 x 3/8	2
Screws to mount chassis Phillips, 12-24 x 1/2", self-tapping	Bag of 14
6-ft serial cable to connect to a management console (RJ-45 Rollover, RJ-45 Jack to Female DB-9)	1
DB-9 (male) to DB-25 (female) adapter for the serial cable	1
15-ft Ethernet cable to connect to a management device (RJ-45 connectors, 4-pair stranded UTP, Category 5E)	1
Split washers for the grounding cable lug	2
PCMCIA Card holder and hook-and-loop fasteners (male 1 of each and female)	1 of each
Accessory Kit Label, Green "Small Parts Enclosed"	1
Label, Accessory Contents, TX Matrix Plus	1
2 pkg, 3" x 5" Poly bag, Pink	1
1 pkg, 9" x 12" Poly bag, Pink, ESD	1
Labels for the fiber-optic array cables	1

Table 6: TX Matrix Plus Tool Box Parts List

Part	Quantity
Circular MT loopback adapters for testing fiber-optic array cables	4
Circular MT loopback connectors for testing fiber-optic array ports	4
Cleaner adapters for the fiber-optic array ports	10
Cleaner connectors for the fiber-optic array cables	10
Dry cloth optical cleaners	5