Overview of Installing the SRX5800 Services Gateway

To install the SRX5800 Services Gateway:

1. Prepare your installation site as described in Site Preparation Checklist for the SRX5800 Services Gateway.
2. Review the safety guidelines explained in SRX5800 Services Gateway General Safety Guidelines and Warnings .
3. Unpack the services gateway and verify the parts.
   1. Unpacking the SRX5800 Services Gateway
   2. Verifying the SRX5800 Services Gateway Parts Received
4. Install the mounting hardware.
   • Installing the SRX5800 Services Gateway Mounting Hardware for a Four-Post Rack or Cabinet
   • Installing the SRX5800 Services Gateway Mounting Hardware in an Open-Frame Rack
5. Remove components from the services gateway chassis as described in Removing Components from the SRX5800 Chassis Before Installing It in the Rack.
6. Lift the services gateway on to the rack as described in Installing the SRX5800 Services Gateway Chassis in the Rack.
7. Reinstall components into the services gateway chassis as described in Reinstalling Components in the SRX5800 Services Gateway Chassis After Installing It in the Rack.
8. Connect cables to the network and external devices.
   • Connecting the SRX5800 Services Gateway to a Management Console or an Auxiliary Device
   • Connecting the SRX5800 Services Gateway to a Network for Out-of-Band Management
   • Connecting the Alarm Relay Wires to the SRX5800 Services Gateway Craft Interface
9. Connect the grounding cable as described in Grounding the SRX5800 Services Gateway .
10. Connect the AC power cord or DC power cables:
    • Connecting Power to an AC-Powered SRX5800 Services Gateway
    • Connecting Power to a DC-Powered SRX5800 Services Gateway
11. Power on the services gateway:
    • Powering On an AC-Powered SRX5800 Services Gateway
    • Powering On a DC-Powered SRX5800 Services Gateway
12. Perform the initial system configuration as described in Initially Configuring the SRX5800 Services Gateway.