Technical Documentation
Verifying the SRX5600 Services Gateway Parts Received
A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order.
If any part is missing, contact a customer service representative.
A fully configured services gateway contains the chassis with installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your device can vary depending on the configuration you ordered.
Table 1: Parts List for a Fully Configured Services Gateway
Component | Quantity |
|---|---|
Chassis, including midplane, craft interface, and rack-mounting brackets | 1 |
IOCs | Up to 5 |
SPCs | Up to 5 |
Routing Engines | 1 or 2 |
SCBs | 1 or 2 |
Power supplies | Up to 4 |
Fan tray | 1 |
Air filter | 1 |
Air filter tray | 1 |
Getting Started Guide | 1 |
Small mounting shelf | 1 |
Blank panels for slots without components installed | One blank panel for each slot not occupied by a component |
Table 2: Accessory Box Parts List
Part | Quantity |
|---|---|
Screws to mount chassis and small shelf | 22 |
Screws to connect grounding cable (1/4-20 thread, 1/2 in. length) | 2 |
Split washers for connecting grounding cable | 2 |
DC power terminal Lugs, 6-AWG | 8 |
RJ-45-to-DB-9 cable to connect the device through the serial port | 1 |
Cable manager brackets | 2 |
Terminal block plug, 3–pole, 5.08 mm spacing, 12A, to connect the device alarms | 2 |
Label, accessories contents, SRX5600 | 1 |
USB flash drive with Junos OS | 1 |
Read me first document | 1 |
Affidavit for T1 connection | 1 |
Juniper Networks Product Warranty | 1 |
End User License Agreement | 1 |
Document sleeve | 1 |
3 in. x 5 in. pink bag | 2 |
9 in. x 12 in. pink bag, ESD | 2 |
Accessory Box, 19 in. x 12 in. x 3 in. | 1 |
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, Category 5E, 15' | 1 |
ESD wrist strap with cable | 1 |
