Technical Documentation
Unpacking a QFX3100 Director Device
The QFX3100 Director devices are shipped in a cardboard carton, secured with foam packing material. The carton also contains an accessory box and quick start instructions.
 | Caution: QFX3100 Director devices are maximally protected inside the shipping carton. Do not unpack the Director devices until you are ready to begin installation. |
To unpack a QFX3100 Director device (see Figure 1):
- Move the shipping carton to a staging area as close to the installation site as possible but where you have enough room to remove the system components.
- Position the carton so that the arrows are pointing up.
- Open the top flaps on the shipping carton.
- Remove the accessory box and verify the contents against the parts inventory.
- Pull out the packing material holding the QFX3100 Director device in place.
- Verify the components received against the inventory provided in Table 1.
- Save the shipping carton and packing materials in case you need to move or ship the device later.
Figure 1: Unpacking a QFX3100 Director Device
Table 1: Inventory of Components Provided with a QFX3100 Director Device
Component | Quantity |
|---|---|
QFX3100 Director device | 1 |
Fan module (installed) | 3 |
AC power supply module (installed) | 2 |
4-port Ethernet network module (installed) | 2 |
Hard disk drive (HDD) module (installed) | 2 |
Mounting screws | 8 |
Two-post rack-mount kit | 1 |
Four-post rack-mount kit | 1 |
