Locating the Serial Number on a QFX3008-I Interconnect Device or Component

If you are returning a device or component to Juniper Networks for repair or replacement, you must locate the serial number of the device or component. You must provide the serial number to the Juniper Networks Technical Assistance Center (JTAC) when you contact them to obtain a Return Materials Authorization (RMA). See Contacting Customer Support to Obtain a Return Materials Authorization for a QFX Series Device or Component.

If the device is operational and you can access the command-line interface (CLI), you can list serial numbers for the device and for some components with a CLI command. If you do not have access to the CLI or if the serial number for the component does not appear in the command output, you can locate the serial number ID label on the physical device or component.

Note: If you want to find the serial number on the physical device component, you will need to remove the component from the device chassis, for which you must have the required parts and tools available.

1. Listing the Chassis and Component Details with the CLI

Listing the Chassis and Component Details with the CLI

To list the QFX3008-I Interconnect device and components and their serial numbers, use the show fabric administration inventory interconnect-devices device-name CLI command.

For information about the show fabric administration inventory interconnect-devices command, see show fabric administration inventory interconnect-devices.