Installing an MX960 Router Overview

To install the MX960 router:

1. Prepare your installation site.

   See MX960 Site Preparation Checklist.

2. Review the safety guidelines.
   • General Safety Guidelines for Juniper Networks Hardware Equipment
   • General Safety Warnings for Juniper Networks Hardware Equipment
3. Unpack the router and verify the parts.
   1. Unpacking the MX960 Router
   2. Verifying the MX960 Parts Received
4. Install the mounting hardware.
   • Installing the MX960 Mounting Hardware for a Four-Post Rack or Cabinet
   • Installing the MX960 Mounting Hardware for Front-Mounting in an Open-Frame Rack
   • Installing the MX960 Mounting Hardware for Center-Mounting in an Open-Frame Rack
5. Lift the router on to the rack. Because of the weight of the router, we recommend that you use a mechanical lift.

   See Installing the MX960 Router Using a Mechanical Lift.

6. Connect cables to the network and external devices.

   See Connecting the MX960 Router to Management and Alarm Devices.

7. Connect the grounding cable

   See Grounding the MX960 Router.

8. Connect the AC power cord or DC power cables:
   • Connecting Power to an AC-Powered MX960 Router with Normal-Capacity Power Supplies
   • Connecting Power to a DC-Powered MX960 Router with Normal-Capacity Power Supplies
9. Power on the router:
   • Powering On an AC-Powered MX960 Router
   • Powering On a DC-Powered MX960 Router
10. Perform the initial system configuration.

    See Initially Configuring the MX960 Router.