Installing an MX480 Router Overview

To install the router:

1. Prepare the installation site.

   See MX480 Site Preparation Checklist.

2. Review the safety guidelines and warnings.
   • General Safety Guidelines for Juniper Networks Hardware Equipment
   • General Safety Warnings for Juniper Networks Hardware Equipment
3. Unpack the router and verify that all parts have been received.
   1. See Unpacking the MX480 Router.
   2. See Verifying the MX480 Router Parts Received.
4. Install the mounting hardware.

   See Installing the MX480 Router Mounting Hardware for a Rack or Cabinet.

5. Install the router.

   See Installing the MX480 Router Using a Mechanical Lift.

6. Connect cables to external devices.

   See Connecting the MX480 Router to Management and Alarm Devices.

7. Connect the grounding cable.

   See Grounding the MX480 Router.

8. Connect the power cables.
   • Connecting Power to an AC-Powered MX480 Router with Normal-Capacity Power Supplies
   • Connecting Power to a DC-Powered MX480 Router with Normal Capacity Power Supplies
9. Power on the router.
   • Powering On an AC-Powered MX480 Router
   • Powering On a DC-Powered MX480 Router
10. Perform the initial system configuration.

    See Initially Configuring the MX480 Router.