Installing a JCS1200 Management Module Filler Tray

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Remove the management module filler and management module tray filler.
3. Make sure that the release handle on the filler tray is in the open position.
4. Slide the filler tray into the management module bay until it stops.
5. Push the filler tray release handle to the closed position.
6. Install a management module or filler (see Installing a JCS1200 Management Module or Module Filler).