Installing the M40e Craft Interface on the Front Impeller Assembly

To attach the craft interface to the front impeller assembly:

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage to an M Series, MX Series, or T Series Router.
2. Place the replacement impeller assembly top side up on an antistatic mat on a flat, stable surface.
3. Attach the craft interface to the front of the impeller assembly, making sure that the hooks on the back of the craft interface clip securely into the windows on the front of the impeller assembly (see Removing the M40e Craft Interface from the Front Impeller Assembly).
4. Align the holes in the three semicircular metal tabs on the back of the craft interface with the corresponding holes in the top of the impeller assembly.
5. Insert the screws you saved when removing the craft interface into the three holes and tighten using a Phillips screwdriver (see Removing the M40e Craft Interface from the Front Impeller Assembly.