Installing an SRX5800 Services Gateway Fan Tray

To install a fan tray (see Figure 1 and Figure 2):

1. Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Grasp the fan tray on each side and insert it straight into the chassis. Note the correct orientation by the "this side up" label on the top surface of the fan tray.
3. Tighten the captive screws on each side of the fan tray faceplate to secure it in the chassis.
4. Lower the cable manager back into position, if necessary.

Figure 1: Installing an Upper Fan Tray (Standard-Capacity Shown, High-Capacity Similar)

Figure 2: Installing a Lower Fan Tray (Standard-Capacity Shown, High-Capacity Similar)