Installing and Connecting an EX3300 Switch

1. Follow instructions in Unpacking an EX3300 Switch.

2. Mount the switch by following instructions appropriate for your site:

   • Mounting an EX3300 Switch on Two Posts in a Rack or Cabinet (using the mounting brackets provided)
   • Mounting an EX3300 Switch on Four Posts in a Rack or Cabinet (using the separately orderable four-post rack-mount kit)
   • Mounting an EX3300 Switch in a Recessed Position in a Rack or Cabinet (using the 2-in.-recess front brackets from the separately orderable four-post rack-mount kit)
   • Mounting an EX3300 Switch on a Desk or Other Level Surface (using the rubber feet provided)
   • Mounting an EX3300 Switch on a Wall (using the separately orderable wall-mount kit)
3. Follow instructions in Connecting Earth Ground to an EX Series Switch.
4. Follow instructions in Connecting AC Power to an EX3300 Switch or Connecting DC Power to an EX3300 Switch.
5. Perform initial configuration of the switch by following instructions in Connecting and Configuring an EX Series Switch (CLI Procedure).

6. Set the switch’s management options by following the appropriate instructions:

   • Connecting an EX Series Switch to a Network for Out-of-Band Management
   • Connecting an EX Series Switch to a Management Console