Mounting an EX3200 Switch on a Desk or Other Level Surface

You can mount an EX3200 switch on a desk or other level surface by using the 4 rubber feet that are shipped with the switch. The rubber feet stabilize the chassis.

Before mounting an EX3200 switch on a desk or other level surface:

• Verify that the site meets the requirements described in Site Preparation Checklist for EX3200 Switches.
• Place the desk in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.
• Read General Safety Guidelines and Warnings, with particular attention to Chassis Lifting Guidelines for EX3200 Switches.
• Remove the switch from the shipping carton (see Unpacking an EX3200 Switch).

Ensure that you have the following parts and tools available:

• 4 rubber feet to stabilize the chassis on the a desk or other level surface (provided in the accessory box shipped with the switch)

To mount the switch on a desk or other level surface:

1. Turn the chassis upside down on the desk or the level surface where you intend to mount the switch.
2. Attach the rubber feet to the bottom of the chassis, as shown in Figure 1.
3. Turn the chassis right side up on the desk or the level surface.

Figure 1: Attaching Rubber Feet to an EX3200 Switch Chassis