- Download
Software
- Research a
Problem - Case Management
- Communities and Forums
- Contract & Product Management
- Technical Documentation Advanced Search
- Documentation Feedback Form
- Documentation Symbols Key
- End-of-Life Products
- Guidelines and Policies
- Security Resources
Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.
What is J-Care?
It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!
Installing and Connecting an EX3200 or EX4200 Switch
The EX3200 and EX4200 switch chassis is a rigid sheet-metal structure that houses the hardware components.
To install and connect an EX3200 or EX4200 switch:
- Follow instructions in Unpacking an EX3200 or EX4200 Switch.
-
Mount the switch by following instructions appropriate for your site:
- Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet (using the mounting brackets provided)
- Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet (using the separately orderable four-post rack-mount kit)
- Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or Cabinet (using the 2-in.-recess front brackets from the separately orderable four-post rack-mount kit)
- Mounting an EX3200 or EX4200 Switch on a Desk or Other Level Surface (using the rubber feet provided)
- Mounting an EX3200 or EX4200 Switch on a Wall (using the separately orderable wall-mount kit)
- Follow instructions in Connecting Earth Ground to an EX Series Switch.
-
Follow instructions for connecting power as appropriate for your site:
- Perform initial configuration of the switch by following instructions in Connecting and Configuring an EX Series Switch (CLI Procedure) or Connecting and Configuring an EX Series Switch (J-Web Procedure).
-
Set the switch’s management options by following the appropriate instructions:
