Technical Documentation

Mounting an EX2200 Switch

Table 1 lists the methods you can use to mount an EX2200 switch.

Table 1: EX2200 Switch Mounting Methods

Mounting Method	Switch Model	Comments
Desk or other level surface (using rubber feet)	EX2200 EX2200-C	On a desk or other level surface by using rubber feet provided with the switch
Desk or other level surface (using screws)	EX2200-C	On or under a desk or other level surface by using screws
Two-post rack or cabinet	EX2200 EX2200-C	On two posts in a 19-in. rack or cabinet by using the mounting brackets.
Four-post rack or cabinet	EX2200 EX2200-C	On four posts in a 19-in. rack or cabinet by using the separately orderable four-post rack-mount kit On two posts in a 19-in. rack or cabinet by using the two post rack mounting brackets.
Recessed position	EX2200	In a position recessed 2 in. from the front of a 19-in. rack or cabinet by using the 2-in.-recess front brackets in the separately orderable four-post rack-mount kit. You can mount the switch in this recessed position on two-post or four-post racks and cabinets
Wall mount	EX2200 EX2200-C	On a wall by using screws or separately orderable wall-mount kit On a wall by using screws
Magnet mount	EX2200-C	On or under a surface made of ferrous material using the separately orderable magnet sheet

When mounting an EX2200 switch chassis in a vertical position, orient the front panel of the chassis downward to ensure proper airflow and meet safety requirements in the event of a fire.
When wall mounting EX2200-24P and EX2200-48P models, install the wall-mount baffle above the units to reduce the risk of objects or substances falling into the air exhaust or power supply, which could cause a fire.

The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that the switch can be mounted in any rack or cabinet that provides holes spaced at that distance.

Choose Country

North America

Europe

Asia Pacific

Technical Documentation

Related Documentation

Mounting an EX2200 Switch

Related Documentation

Published: 2011-08-24