Installing the SRX5800 Services Gateway Air Filter

To install the air filter (see Figure 1):

1. Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Ensure the air filter is right side up.
3. Place the air filter into the air filter tray.
4. Insert the air filter tray into the chassis by sliding it straight into the chassis until it stops.
5. Lower the cable manager back into position.
6. Rearrange the cables in the cable manager.

Figure 1: Installing the Air Filter Standard-Capacity Filter Tray Shown, High-Capacity Similar)