Technical Documentation
Rear Card LEDs on a QFX3008-I Interconnect Device
Each rear card has two LEDs on the right side of the module front panel that indicate rear card status. See Figure 1.
Figure 1: Rear Card LEDs on a QFX3008-I Interconnect Device
Table 1 describes these LEDs, their colors and states, and the status they indicate.
Table 1: Rear Card LEDs on a QFX3008-I Interconnect Device
LED | Color | State | Description |
|---|---|---|---|
Status | Green | On steadily | Rear card is operating normally. |
Intermittent blinking | The beacon feature has been enabled on the card using the request chassis beacon command. | ||
Amber | On steadily | Software is loading on the rear card. | |
Blinking | Rear card has failed and needs to be replaced. See Installing a 16-Port QSFP+ Front Card in a QFX3008-I Interconnect Device. | ||
Power | Unlit | Off | There is no power to the rear card, or the rear card is not fully seated in the chassis. See Installing a Rear Card in a QFX3008-I Interconnect Device. |
Green | On steadily | Rear card is powered on. | |
Amber | Blinking | Rear card is offline. |
