Technical Documentation
New
RJ-45 Connector Pinouts for the SRX5600 Services Gateway Routing Engine Auxiliary and Console Ports
The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial interfaces that accept an RJ-45 connector. The ports connect the Routing Engine to an auxiliary or console management device. Table 1 describes the RJ-45 connector pinout.
Table 1: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Pin | Signal | Description |
|---|---|---|
1 | RTS | Request to Send |
2 | DTR | Data Terminal Ready |
3 | TXD | Transmit Data |
4 | Ground | Signal Ground |
5 | Ground | Signal Ground |
6 | RXD | Receive Data |
7 | DSR/DCD | Data Set Ready |
8 | CTS | Clear to Send |
Published: 2013-01-18
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
