Technical Documentation
Documentation Search
RJ-45 Connector Pinouts for the SRX650 Services Gateway Console Port
The port on the front panel labeled CONSOLE is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an RJ-45 cable for connecting the services gateway to a management LAN (or other device that supports out-of-band management). Table 1 describes the RJ-45 connector pinouts for the console port.
Table 1: RJ-45 Connector Pinouts for the Services Gateway Console Port
Pin | Signal | Description |
|---|---|---|
1 | RTS | Request to Send |
2 | DTR | Data Terminal Ready |
3 | TXD | Transmit Data |
4 | Ground | Signal Ground |
5 | Ground | Signal Ground |
6 | RXD | Receive Data |
7 | DSR/DCD | Data Set Ready |
8 | CTS | Clear to Send |
Published: 2010-12-01
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
