Technical Documentation
USB Port Specifications for the QFX Series
The following Juniper Networks USB flash drives have been tested and are officially supported for the USB port in a QFX Series device:
- RE-USB-1G-S—1-gigabyte (GB) USB flash drive (except QFX3100 Director device)
- RE-USB-2G-S—2-GB USB flash drive (except QFX3100 Director device)
- RE-USB-4G-S—4-GB USB flash drive
 | Caution: Any USB memory product not listed as supported for QFX Series devices has not been tested by Juniper Networks. The use of any unsupported USB memory product could expose your device to unpredictable behavior. Juniper Networks Technical Assistance Center (JTAC) can provide only limited support for issues related to unsupported hardware. We strongly recommend that you use only supported USB flash drives. |
| Caution: Remove the USB flash drive before upgrading Junos OS or rebooting the QFX Series device. Failure to do so could expose your device to unpredictable behavior. |
 | Note: Executing the request system snapshot CLI command on a QFX3500 device requires an external USB flash drive with at least 4 GB of free space. We recommend using the RE-USB-4G-S flash drive. |
| Note: USB flash drives used with the QFX Series device must support USB 2.0 or later. |
