Technical Documentation

Download Software

Research a Problem

Case Management

Contract & Product Management

Documentation Archive

Guidelines and Policies

Security Resources

Network Port LEDs in an EX8200 Switch

Each network port on the faceplate of a line card has two LEDs. Figure 1 shows the network port LEDs on the line cards.

Figure 1: Network Port LEDs on Line Cards

The LEDs labeled Link/Activity in Figure 1 indicate link activity.

Table 1 describes the Link/Activity LED.

Table 1: Network Port LEDs on Line Cards in an EX8200 Switch—Link/Activity LED

LED	Color	State and Description
Link/Activity	Green	On steadily—The port and the link are active, but there is no link activity. Blinking—The port and the link are active, and there is link activity. Off—The port is not active.

The LEDs labeled Status in Figure 1 indicate the status of one of the three port parameters. The port parameters are administrative status, speed, duplex mode, and Power over Ethernet (PoE) status.

Table 2 describes the Status LED. From the Idle menu of the LCD panel, use the Enter button on the LCD panel to toggle between the ADM, SPD, DPX, and POE indicators.

Table 2: Network Port LEDs on Line Cards in an EX8200 Switch—Status LED

LED	LCD Indicator	State, Color, and Description
Status	LED: ADM	Indicates the administrative status (enabled or disabled). The status indicators are: Green—Administrative status enabled. Yellow—The port is down. Unlit—Administrative status disabled.
	LED: SPD	Indicates the speed. The speed indicators are different in the line cards. The speed indicators for 8-port SFP+ line cards are: Unlit—Less than 10 Gbps Green—10 Gbps The speed indicators for 40-port SFP+ line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps or 10 Gbps The speed indicators for EX8200-2XS-40P line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps or 10 Gbps The speed indicators for EX8200-2XS-40T line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps or 10 Gbps The speed indicators for EX8200-48PL line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps The speed indicators for EX8200-48TL line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps The speed indicators for 48-port SFP line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps The speed indicators for 48-port RJ-45 line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps
	LED: DPX	Indicates the duplex mode. The status indicators are: Green—Port is set to full-duplex mode. Unlit—Port is not set to full-duplex mode.
	LED: POE	Indicates the PoE mode. The status indicators are: Green—PoE is enabled on the port and a device is drawing power. Yellow—PoE is enabled on the port, but no power is drawn from the port. Unlit—PoE is not enabled on the port.

Choose Country

North America

Europe

Asia Pacific

Technical Documentation

Related Documentation

Network Port LEDs in an EX8200 Switch

Related Documentation

Published: 2011-11-22