Technical Documentation

• Downloads
• Management Port LEDs in EX Series Switches    

• Related Topics
• See Rear Panel of an EX3200 Switch for port location.
• See Rear Panel of an EX4200 Switch for port location.
• See Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch for port location.
• See Routing Engine (RE) Module in an EX8216 Switch for port location.
• Connecting an EX Series Switch to a Network for Out-of-Band Management

Management Port LEDs in EX Series Switches

The management port on an EX Series switch has two LEDs. The three figures in this topic show the location of those LEDs:

• Figure 1—EX3200 switch
• Figure 2—EX4200 switch
• Figure 3—EX8200 switch

Figure 1: LEDs on the Management Port on an EX3200 Switch

Figure 2: LEDs on the Management Port on an EX4200 Switch

Figure 3: LEDs on the Management Port on an EX8200 Switch

Table 1 describes the Link/Activity LED.

Table 1: Link/Activity LED on the Management Port on an EX Series Switch

LED	Color	State and Description
Link/Activity	Green	Blinking—The port and the link are active, and there is link activity. On steadily—The port and the link are active, but there is no link activity. Off—The port is not active.

Table 2 describes the Status LED.

Table 2: Status LED on the Management Port on an EX Series Switch

LED	Color	State and Description
Status	Green	Indicates the speed of the port. The speed indicators are: One blink per second—10 Mbps Two blinks per second—100 Mbps Three blinks per second—1000 Mbps