Technical Documentation
New
Pluggable Transceivers Supported on EX4200 Switches
Optional uplink modules for EX4200 switches support SFP, SFP+, or XFP transceivers. This topic describes the optical interfaces supported for those transceivers. It also lists the copper interface supported for the SFP transceivers.
 | Note: Use only optical transceivers and optical connectors purchased from Juniper Networks for your EX Series switches. |
The Gigabit Ethernet SFP, SFP+, or XFP transceivers installed in EX4200 switches support digital optical monitoring (DOM): You can view the diagnostic details for these transceivers by issuing the operational mode CLI command show interfaces diagnostics optics.
| Note: The transceivers support DOM even if they are installed in uplink module ports configured as Virtual Chassis ports. |
The tables in this topic describe the optical interface support over single-mode fiber-optic (SMF) and multimode fiber-optic (MMF) cables for SFP, SFP+, and XFP transceivers and over the copper interface for SFP transceivers:
- Table 1—Optical interface support and copper interface support for Gigabit Ethernet SFP transceivers.
- Table 2—Optical interface support for Fast Ethernet SFP transceivers.
- Table 3—Optical interface support for Gigabit Ethernet SFP+ transceivers.
- Table 4—Optical interface support for Gigabit Ethernet XFP transceivers.
Table 1: Optical Interface Support and Copper Interface Support for Gigabit Ethernet SFP Transceivers
Ethernet Standard | Specification | Value | |||
|---|---|---|---|---|---|
1000BASE-T | Model Number | EX-SFP-1GE-T | |||
Rate | 10/100/1000 Mbps | ||||
Connector Type | RJ-45 | ||||
Fiber Count | Copper | ||||
Transmitter Wavelength | – | ||||
Minimum Launch Power | – | ||||
Maximum Launch Power | – | ||||
Minimum Receiver Sensitivity | – | ||||
Maximum Input Power | – | ||||
Fiber Type | Copper | ||||
Core/Cladding Size | – | ||||
Modal Bandwidth | – | ||||
Distance | 100 m (328 ft) | ||||
DOM Support | Not available | ||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | No | ||||
1000BASE-SX | Model Number | EX-SFP-1GE-SX | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Dual | ||||
Transmitter Wavelength | 850 nm | ||||
Minimum Launch Power | –9.5 dBm | ||||
Maximum Launch Power | –3 dBm | ||||
Minimum Receiver Sensitivity | –21 dBm | ||||
Maximum Input Power | 0 dBm | ||||
Fiber Type | MMF | ||||
Core/Cladding Size | 62.5/125 µm | 62.5/125 µm | 50/125 µm | 50/125 µm | |
Fiber Grade | FDDI | OM1 | – | OM2 | |
Modal Bandwidth | 160 MHz/km | 200 MHz/km | 400 MHz/km | 500 MHz/km | |
Distance | 220 m (722 ft) | 275 m (902 ft) | 500 m (1640 ft) | 550 m (1804 ft) | |
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-1GE-LX | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Dual | ||||
Transmitter Wavelength | 1310 nm | ||||
Minimum Launch Power | –9.5 dBm | ||||
Maximum Launch Power | –3 dBm | ||||
Minimum Receiver Sensitivity | –25 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 10 km (6.2 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-BX-U | Model Number | EX-SFP-GE10KT13R14 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1310 nm | ||||
Receiver Wavelength | 1490 nm | ||||
Minimum Launch Power | –9 dBm | ||||
Maximum Launch Power | –3 dBm | ||||
Minimum Receiver Sensitivity | –30 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 10 km (6.2 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.4 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-BX-D | Model Number | EX-SFP-GE10KT14R13 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1490 nm | ||||
Receiver Wavelength | 1310 nm | ||||
Minimum Launch Power | –9 dBm | ||||
Maximum Launch Power | –3 dBm | ||||
Minimum Receiver Sensitivity | –30 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 10 km (6.2 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.4 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-BX-U | Model Number | EX-SFP-GE10KT13R15 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1310 nm | ||||
Receiver Wavelength | 1550 nm | ||||
Minimum Launch Power | –9 dBm | ||||
Maximum Launch Power | –3 dBm | ||||
Minimum Receiver Sensitivity | –21 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 10 km (6.2 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.5 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-BX-D | Model Number | EX-SFP-GE10KT15R13 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1550 nm | ||||
Receiver Wavelength | 1310 nm | ||||
Minimum Launch Power | –9 dBm | ||||
Maximum Launch Power | –3 dBm | ||||
Minimum Receiver Sensitivity | –21 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 10 km (6.2 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.5 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-BX-U | Model Number | EX-SFP-GE40KT13R15 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1310 nm | ||||
Receiver Wavelength | 1550 nm | ||||
Minimum Launch Power | –6.5 dBm | ||||
Maximum Launch Power | 2 dBm | ||||
Minimum Receiver Sensitivity | –23 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 40 km (24.8 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.5 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-BX-D | Model Number | EX-SFP-GE40KT15R13 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1550 nm | ||||
Receiver Wavelength | 1310 nm | ||||
Minimum Launch Power | –6.5 dBm | ||||
Maximum Launch Power | 2 dBm | ||||
Minimum Receiver Sensitivity | –23 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 40 km (24.8 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.5 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-1GE-LX40K | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Double | ||||
Transmitter Wavelength | 1310 nm | ||||
Minimum Launch Power | –14 dBm | ||||
Maximum Launch Power | –8 dBm | ||||
Minimum Receiver Sensitivity | –45 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 40 km (24.8 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.4 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LH (or 1000BASE-ZX) | Model Number | EX-SFP-1GE-LH | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Dual | ||||
Transmitter Wavelength | 1550 nm | ||||
Minimum Launch Power | –2 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –25 dBm | ||||
Maximum Input Power | –3 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 µm | ||||
Modal Bandwidth | – | ||||
Distance | 70 km (43.5 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1470 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1470 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1490 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1490 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1510 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1510 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1530 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1530 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1550 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1550 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1570 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1570 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1590 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1590 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
1000BASE-LX | Model Number | EX-SFP-GE80KCW1610 | |||
Rate | 1000 Mbps | ||||
Connector Type | LC | ||||
Fiber Count | Single | ||||
Transmitter Wavelength | 1610 nm | ||||
Minimum Launch Power | 0 dBm | ||||
Maximum Launch Power | 5 dBm | ||||
Minimum Receiver Sensitivity | –32 dBm | ||||
Maximum Input Power | –8 dBm | ||||
Fiber Type | SMF | ||||
Core/Cladding Size | 9/125 μm | ||||
Modal Bandwidth | – | ||||
Distance | 80 km (49.7 miles) | ||||
DOM Support | Available | ||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | ||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | ||||
Table 2: Optical Interface Support for Fast Ethernet SFP Transceivers
Ethernet Standard | Specification | Value |
|---|---|---|
100BASE-FX | Model Number | EX-SFP-1FE-FX |
Rate | 100 Mbps | |
Connector Type | LC | |
Fiber Count | Dual | |
Transmitter Wavelength | 1310 nm | |
Minimum Launch Power | –20 dBm | |
Maximum Launch Power | –14 dBm | |
Minimum Receiver Sensitivity | –32.5 dBm | |
Maximum Input Power | –8 dBm | |
Fiber Type | MMF | |
Core/Cladding Size | 62.5/125 µm | |
Fiber Grade | FDDI/OM1 | |
Modal Bandwidth | 500 MHz/km | |
Distance | 2 km (1.2 miles) | |
DOM Support | Not available | |
Software Required | Junos OS for EX Series switches, Release 9.2 or later | |
Virtual Chassis port (VCP)-configurable on EX4200 switches | No | |
100BASE-LX | Model Number | EX-SFP-1FE-LX |
Rate | 100 Mbps | |
Connector Type | LC | |
Fiber Count | Dual | |
Transmitter Wavelength | 1310 nm | |
Minimum Launch Power | –15 dBm | |
Maximum Launch Power | –8 dBm | |
Minimum Receiver Sensitivity | –31.5 dBm | |
Maximum Input Power | –8 dBm | |
Fiber Type | SMF | |
Core/Cladding Size | 9/125 µm | |
Modal Bandwidth | – | |
Distance | 10 km (6.2 miles) | |
DOM Support | Not available | |
Software Required | Junos OS for EX Series switches, Release 9.5 or later | |
Virtual Chassis port (VCP)-configurable on EX4200 switches | No | |
100BASE-BX-U | Model Number | EX-SFP-FE20KT13R15 |
Rate | 100 Mbps | |
Connector Type | LC | |
Fiber Count | Single | |
Transmitter Wavelength | 1310 nm | |
Receiver Wavelength | 1550 nm | |
Minimum Launch Power | –14 dBm | |
Maximum Launch Power | –8 dBm | |
Minimum Receiver Sensitivity | –45 dBm | |
Maximum Input Power | –8 dBm | |
Fiber Type | SMF | |
Core/Cladding Size | 9/125 µm | |
Modal Bandwidth | – | |
Distance | 20 km (12.4 miles) | |
DOM Support | Not available | |
Software Required | Junos OS for EX Series switches, Release 9.3 or later | |
Virtual Chassis port (VCP)-configurable on EX4200 switches | No | |
100BASE-BX-D | Model Number | EX-SFP-FE20KT15R13 |
Rate | 100 Mbps | |
Connector Type | LC | |
Fiber Count | Single | |
Transmitter Wavelength | 1550 nm | |
Receiver Wavelength | 1310 nm | |
Minimum Launch Power | –14 dBm | |
Maximum Launch Power | –8 dBm | |
Minimum Receiver Sensitivity | –45 dBm | |
Maximum Input Power | –8 dBm | |
Fiber Type | SMF | |
Core/Cladding Size | 9/125 µm | |
Modal Bandwidth | – | |
Distance | 20 km (12.4 miles) | |
DOM Support | Not available | |
Software Required | Junos OS for EX Series switches, Release 9.3 or later | |
Virtual Chassis port (VCP)-configurable on EX4200 switches | No | |
100BASE-LX40K | Model Number | EX-SFP-1FE-LX40K |
Rate | 100 Mbps | |
Connector Type | LC | |
Fiber Count | Dual | |
Transmitter Wavelength | 1310 nm | |
Minimum Launch Power | –5 dBm | |
Maximum Launch Power | 0 dBm | |
Minimum Receiver Sensitivity | –32 dBm | |
Maximum Input Power | –8 dBm | |
Fiber Type | SMF | |
Core/Cladding Size | 9/125 µm | |
Modal Bandwidth | – | |
Distance | 40 km (24.8 miles) | |
DOM Support | Not available | |
Software Required | Junos OS for EX Series switches, Release 10.0 or later | |
Virtual Chassis port (VCP)-configurable on EX4200 switches | No | |
100BASE-LH (or 100BASE-ZX) | Model Number | EX-SFP-1FE-LH |
Rate | 100 Mbps | |
Connector Type | LC | |
Fiber Count | Dual | |
Transmitter Wavelength | 1310 nm | |
Minimum Launch Power | –5 dBm | |
Maximum Launch Power | 0 dBm | |
Minimum Receiver Sensitivity | –32 dBm | |
Maximum Input Power | –8 dBm | |
Fiber Type | SMF | |
Core/Cladding Size | 9/125 µm | |
Modal Bandwidth | – | |
Distance | 80 km (49.7 miles) | |
DOM Support | Not available | |
Software Required | Junos OS for EX Series switches, Release 10.0 or later | |
Virtual Chassis port (VCP)-configurable on EX4200 switches | No |
Table 3: Optical Interface Support for Gigabit Ethernet SFP+ Transceivers
Ethernet Standard | Specification | Value | ||||
|---|---|---|---|---|---|---|
10GBASE-USR | Model Number | EX-SFP-10GE-USR | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 850 nm | |||||
Minimum Launch Power | –7.3 dBm | |||||
Maximum Launch Power | –1.3 dBm | |||||
Minimum Receiver Sensitivity | –11.1 dBm | |||||
Maximum Input Power | –1.0 dBm | |||||
Fiber Type | MMF | |||||
Core/Cladding Size | 62.5/125 µm | 50/125 µm | 50/125 µm | |||
Fiber Grade | OM1 | OM3 | OM3 | |||
Modal Bandwidth | 200 MHz/km | 500 MHz/km | 1500 MHz/km | |||
Distance | 10 m (32.8 ft) | 30 m (98.4 ft) | 100 m (328 ft) | |||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 10.2 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-SR | Model Number | EX-SFP-10GE-SR | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 850 nm | |||||
Minimum Launch Power | –7.3 dBm | |||||
Maximum Launch Power | –1 dBm | |||||
Minimum Receiver Sensitivity | –9.9 dBm | |||||
Maximum Input Power | –1 dBm | |||||
Fiber Type | MMF | |||||
Core/Cladding Size | 62.5/125 µm | 62.5/125 µm | 50/125 µm | 50/125 µm | 50/125 µm | |
Fiber Grade | FDDI | OM1 | – | OM2 | OM3 | |
Modal Bandwidth | 160 MHz/km | 200 MHz/km | 400 MHz/km | 500 MHz/km | 1500 MHz/km | |
Distance | 26 m (85 ft) | 33 m (108 ft) | 66 m (216 ft) | 82 m (269 ft) | 300 m (984 ft) | |
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 9.4 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-LRM | Model Number | EX-SFP-10GE-LRM | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 1310 nm | |||||
Minimum Launch Power | –6.5 dBm | |||||
Maximum Launch Power | 0.5 dBm | |||||
Minimum Receiver Sensitivity | –21 dBm | |||||
Maximum Input Power | 0.5 dBm | |||||
Fiber Type | MMF | |||||
Core/Cladding Size | 62.5/125 µm | 50/125 µm | 50/125 µm | |||
Fiber Grade | FDDI/OM1 | OM2 | OM3 | |||
Modal Bandwidth | 500 MHz/km | 500 MHz/km | 500 MHz/km | |||
Distance | 220 m (722 ft) | 220 m (722 ft) | 220 m (722 ft) | |||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 9.5 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-LR | Model Number | EX-SFP-10GE-LR | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 1310 nm | |||||
Minimum Launch Power | –8.2 dBm | |||||
Maximum Launch Power | 0.5 dBm | |||||
Minimum Receiver Sensitivity | –18 dBm | |||||
Maximum Input Power | 0.5 dBm | |||||
Fiber Type | SMF | |||||
Core/Cladding Size | 9/125 µm | |||||
Modal Bandwidth | – | |||||
Distance | 10 km (6.2 miles) | |||||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 9.4 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-ER | Model Number | EX-SFP-10GE-ER | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 1550 nm | |||||
Minimum Launch Power | –4.7 dBm | |||||
Maximum Launch Power | 4 dBm | |||||
Minimum Receiver Sensitivity | –15.8 dBm | |||||
Maximum Input Power | –1 dBm | |||||
Fiber Type | SMF | |||||
Core/Cladding Size | 9/125 µm | |||||
Modal Bandwidth | – | |||||
Distance | 40 km (24.8 miles) | |||||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 10.3 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
Table 4: Optical Interface Support for Gigabit Ethernet XFP Transceivers
Ethernet Standard | Specification | Value | ||||
|---|---|---|---|---|---|---|
10GBASE-SR | Model Number | EX-XFP-10GE-SR | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 850 nm | |||||
Minimum Launch Power | –7.3 dBm | |||||
Maximum Launch Power | –1.3 dBm | |||||
Minimum Receiver Sensitivity | –11.1 dBm | |||||
Maximum Input Power | –1 dBm | |||||
Fiber Type | MMF | |||||
Core/Cladding Size | 62.5/125 µm | 62.5/125 µm | 50/125 µm | 50/125 µm | 50/125 µm | |
Fiber Grade | FDDI | OM1 | – | OM2 | OM3 | |
Modal Bandwidth | 160 MHz/km | 200 MHz/km | 400 MHz/km | 500 MHz/km | 1500 MHz/km | |
Distance | 26 m (85 ft) | 33 m (108 ft) | 66 m (216 ft) | 82 m (269 ft) | 300 m (984 ft) | |
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-LR | Model Number | EX-XFP-10GE-LR | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 1310 nm | |||||
Minimum Launch Power | –8.2 dBm | |||||
Maximum Launch Power | 1 dBm | |||||
Minimum Receiver Sensitivity | –18 dBm | |||||
Maximum Input Power | 0.5 dBm | |||||
Fiber Type | SMF | |||||
Core/Cladding Size | 9/125 µm | |||||
Modal Bandwidth | – | |||||
Distance | 10 km (6.2 miles) | |||||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-ER | Model Number | EX-XFP-10GE-ER | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 1550 nm | |||||
Minimum Launch Power | –4.7 dBm | |||||
Maximum Launch Power | 2 dBm | |||||
Minimum Receiver Sensitivity | –15.8 dBm | |||||
Maximum Input Power | –1 dBm | |||||
Fiber Type | SMF | |||||
Core/Cladding Size | 9/125 µm | |||||
Modal Bandwidth | – | |||||
Distance | 40 km (24.8 miles) | |||||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-ZR | Model Number | EX-XFP-10GE-ZR | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | 1550 nm | |||||
Minimum Launch Power | 0 | |||||
Maximum Launch Power | 4 dBm | |||||
Minimum Receiver Sensitivity | –30 dBm | |||||
Maximum Input Power | –7 dBm | |||||
Fiber Type | SMF | |||||
Core/Cladding Size | 9/125 µm | |||||
Modal Bandwidth | – | |||||
Distance | 80 km (49.7 miles) | |||||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 9.0 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
10GBASE-ZR | Model Number | EX-XFP-10GE80KDWDM | ||||
Rate | 10 Gbps | |||||
Connector Type | LC | |||||
Fiber Count | Dual | |||||
Transmitter Wavelength | Tunable (1528 nm through 1569 nm) | |||||
Minimum Launch Power | –1 dBm | |||||
Maximum Launch Power | 3 dBm | |||||
Minimum Receiver Sensitivity | –24 dBm | |||||
Maximum Input Power | –1 dBm | |||||
Fiber Type | SMF | |||||
Core/Cladding Size | 9/125 μm | |||||
Modal Bandwidth | – | |||||
Distance | 80 km (49.7 miles) | |||||
DOM Support | Available | |||||
Software Required | Junos OS for EX Series switches, Release 12.1 or later | |||||
Virtual Chassis port (VCP)-configurable on EX4200 switches | Yes | |||||
