Technical Documentation
M Series Search
Related Documentation
M7i Router AC Power, Connection, and Power Cord Specifications
Detachable AC power cords, each 2.5 m (approximately 8 ft) long, are supplied with the router. The C13 appliance coupler at the female end of the cord inserts into the AC appliance inlet coupler, type C14 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source receptacle that is standard for your geographical location.
 | Warning: The AC power cord for the router is intended for use with the router only and not for any other use. |
|  Warning: Translation from Japanese: The attached power cable is only for this product. Do not use the cable for another product. |
 | Note: In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the router are in compliance. |
Table 1 provides specifications and Figure 1 depicts the plug on the AC power cord provided for each country or region.
Table 1: AC Power Cord Specifications
Country | Electrical Specification | Plug Type |
|---|---|---|
Australia | 240 VAC, 50 Hz AC | SAA/3 |
Europe (except Italy and United Kingdom) | 220 or 230 VAC, 50 Hz AC | CEE 7/7 |
Italy | 230 VAC, 50 Hz AC | CEI 23-16 |
North America | 120 VAC, 60 Hz AC | NEMA 5-15P |
United Kingdom | 240 VAC, 50 Hz AC | BS89/13 |
Figure 1: AC Plug Types
| Note: Power cords and cables must not block access to router components or drape where people could trip on them. |
