Technical Documentation
EX Series Search
Related Documentation
- EX Series
- Uplink Modules in EX3200 Switches
- Installing a Power Supply in an EX3200 Switch
- Removing a Power Supply from an EX3200 Switch
- Installing a Fan Tray in an EX3200 Switch
- Removing a Fan Tray from an EX3200 Switch
- Installing an Uplink Module in an EX3200 Switch
- Removing an Uplink Module from an EX3200 Switch
- Installing a Transceiver in an EX Series Switch
- Removing a Transceiver from an EX Series Switch
Field-Replaceable Units in EX3200 Switches
Field-replaceable units (FRUs) are components that you can replace at your site. The FRUs in the switch are:
- Power supply
- Fan tray
- Uplink module
- SFP transceiver
- SFP+ transceiver
- XFP transceiver
 | Note: Uplink modules are not part of the standard package and must be ordered separately. |
The power supply, fan tray, uplink module, and transceivers are hot-removable and hot-insertable: You can remove and replace them without powering off the switch or disrupting switch functions.
| Note: If you have a Juniper J-Care service contract, register any addition, change, or upgrade of hardware components at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp. Failure to do so can result in significant delays if you need replacement parts. This note applies if you change the type of power supply or add a new type of uplink module. It does not apply if you replace these components with the same type of component. |
Related Documentation
- EX Series
- Uplink Modules in EX3200 Switches
- Installing a Power Supply in an EX3200 Switch
- Removing a Power Supply from an EX3200 Switch
- Installing a Fan Tray in an EX3200 Switch
- Removing a Fan Tray from an EX3200 Switch
- Installing an Uplink Module in an EX3200 Switch
- Removing an Uplink Module from an EX3200 Switch
- Installing a Transceiver in an EX Series Switch
- Removing a Transceiver from an EX Series Switch
