Technical Documentation
TX Matrix Management Port Cable Specifications
For management and service operations, you connect the Routing Engine to an external console or management network through ports on the corresponding TX-CIP.
Table 1 lists the specifications for the cables that connect to management ports.
Table 1: Cable Specifications for Routing Engine Management Interfaces
Port | Cable Specification | Cable/Wire Supplied | Maximum Length | TX Matrix Router Receptacle |
|---|---|---|---|---|
Management console or auxiliary interface | RS-232 (EIA-232) serial cable | One 6-ft (1.83-m) length with DB-9/DB-9 connectors | 6 ft (1.83 m) | DB-9 male |
Management Ethernet interface | Category 5 cable or equivalent suitable for 100Base-T operation | One 15-ft (4.57-m) length with RJ-45/RJ-45 connectors | 328 ft (100 m) | RJ-45 autosensing |
Published: 2011-12-19
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
