T320 Chassis Grounding Cable and Lug Specifications

Warning: Power plant ground and chassis ground must be connected to the same building ground.

You must provide grounding cables that meets these requirements:

• The cable must be able to handle up to 75 A.
• 6-AWG (13.3 mm²), minimum 90°C wire, or as permitted by the local code

Caution: Before router installation begins, a licensed electrician must attach a cable lug to the grounding and power cables that you supply. A cable with an incorrectly attached lug can damage the router.

The cable lug shown in Figure 1 is required for the grounding cables and for the DC power cables.

Figure 1: DC Power and Grounding Cable Lug