Technical Documentation
Documentation Search
SRX650 Services Gateway Supported AC Power Cords
 | Warning: The AC power cord for the services gateway is intended for use with the services gateway only and not for any other use. |
 | Note: In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in length, to comply with National Electrical code (NEC) Section 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code (CEC) Section 4-010(3). |
Table 1 provides power cord specifications, and Figure 1 depicts the plug on the AC power cord provided for each country or region.
Table 1: AC Power Cord Specifications
Country | Electrical Specification | Plug Standards |
|---|---|---|
Australia | 250 VAC, 10 A, 50 Hz | AS/NZ 3112-1993 |
China | 250 VAC, 10 A, 50 Hz | GB2099.1 1996 and GB 1002 1996 (CH1-10P) |
Europe (except Italy and United Kingdom) | 250 VAC, 10 A, 50 Hz | CEE (7) VII |
Italy | 250 VAC, 10 A, 50 Hz | CEI 23-16/VII |
Japan | 125 VAC, 12 A, 50 or 60 Hz | JIS 8303 |
North America | 125 VAC, 10 A, 60 Hz | NEMA 5-15 |
United Kingdom | 250 VAC, 10 A, 50 Hz | BS 1363A |
Figure 1: AC Plug Types
| Note: Power cords and cables must not block access to services gateway components or drape where people might trip on them. |
